The T-GRID Ceiling is a modular ceiling system widely used in cleanrooms. It consists of T-shaped profiles, suspension rods, adjustable hangers, connectors, and blank panels. Produced by HVAC Technology, the T-GRID Ceiling offers a modular, cleanroom-compatible ceiling solution that supports the integration of High-Efficiency Particulate Air (HEPA) filters, Fan Filter Units (FFU), lighting, and Heating, Ventilation, and Air Conditioning (HVAC) systems.

Key Features and Advantages
Design Standards
This product strictly complies with ISO 5–ISO 8 and GMP standards. It features a high-strength 38×38 mm extruded aluminum frame that is resistant to corrosion.
01
Easy Installation
Utilizing flexible, multi-point connection technology, the system is quick and simple to install; it is also fully compatible with FFU (Fan Filter Unit) systems and rock wool panels.
02
Comprehensive Accessories
Equipped with a complete set of connectors and leveling adjusters to ensure precise alignment.
03
Easy to Clean
The smooth, clean surface of the framework not only enhances the facility's appearance but also allows for effortless wiping during routine disinfection.
04
Specifications
|
Parameter Category |
Details |
|
Main Frame |
38mm×38mm aluminum extrusion profile |
|
Connector Types |
2-way / 3-way / 4-way standard connectors |
|
Fasteners |
M8 connecting bolts, M4 suspension screws |
|
Matching Panel |
1170×570mm blind panel, rock wool panel |
|
Applicable Scene |
Cleanroom, HVAC system, FFU installation, RC ceiling |
|
Adjustment Function |
Integrated level adjuster for flatness correction |
Considerations for Selection and Installation
For high-grade cleanroom environments or areas subject to VHP (Vaporized Hydrogen Peroxide) fumigation, prioritize the use of anodized aluminum alloy T-grids; do not use standard lightweight steel framing.
For walk-on ceilings, suspension rods must be at least M8 in size, with a spacing of no more than 1.2 meters between suspension points. All suspension rods must be anchored independently to the building structure; sharing supports with piping or ductwork hangers is strictly prohibited.
Grid joints must be reinforced; specifically, use four-way connectors to strengthen the framework at FFU (Fan Filter Unit) locations.
Verify the flatness of the installation upon completion; for airtight systems, conduct a leakage test.
Keep the protective film on all profiles until the final inspection and acceptance to prevent scratches or dust accumulation during construction.
Properly seal all grid corners, joints, and suspension rod attachment points to eliminate "dead zones" where dust could accumulate.
Hot Tags: t-grid ceiling, China t-grid ceiling manufacturers, suppliers, factory, Air Self Purifier, Air Shower, cleanroom, Purification Accessories, Purification Lamps, T GRID Ceiling






